微信扫码

  • 暂无联系客服
  • 暂无热线电话

880.jpg

DESCRIPTION & MAIN PROPERTIES:

WELSIL GLAZING AND METAL SILICONE SEALANT-880 is one component, neutral solidification under room temperature which cures on exposure to moisture vapour to form a very elastic silicone rubber.

Excellent adhesion to smooth surfaces such as: glass, ceramics, aluminum, granite, concrete, cement and other inorganic surfaces and many other common construction substrates.

Good weatherability withstand large temperature difference, ultraviolet light, while its physical properties remain unchanged for several years. vGood elasticity and tensile property ±20-25% displacement capacity after curing  between the temperature of -20℃~+120℃.

Good elasticity and tensile property ±20-25% displacement capacity after curing  between the temperature of -20℃~+120℃.

 

APPLICATIONS:

Perimeter pointing internally and externally around Aluminum / UPVC / Wood and all other window & doors frames;

Weather sealing and joint sealing to pre-formed panel & aluminium composit panels, and policarbonate panels,lighting roof buildings. v

Suitable as an expansion joint sealant; v

General glazing sealing and Draughtproofing, Glass to glass and glass to aluminum / upvc / wood sealing;

 

ADHESION 

WELSIL GLAZING AND METAL SILICONE SEALANT-880 exhibits excellent primerless adhesion to most non-porous siliceous materials (e.g. glass, tiles, ceramics, enamel, glazed tiles); impregnated, varnished or painted wood and some plastics.

Users must carry out own tests due to the great variety of substrates.

The adhesion can be improved in many cases by pretreatment of the substrate with a primer.

 

DIRECTIONS:

Application surface should be clean,dry and free from all contaminants,i.e,dust ,rust,grease etc.

Cut the nozzle at an angle and apply the sealant with a standard caulking gun.

Tool immediately to spread the sealant against all surface and give a smooth finish.

 

HEALTH & SAFETY:

Avoid contact with eyes.

Keep out of reach of children.

Please dispose of empty cartridge correctly.

It is a low hazard product.

 

LIMITATIONS:

Not suitable for aquariums and in areas of food preparation.

Not recommended for use with PMMA,PP,PE,Teflon,Bituminous,Wax or Paraffin.

 

COLOUR

Clearwhiteblackgrey and other colours based on customer’s requirement.

 

PACKING

Inner packing:300ml/pc

Outer packing:24pcs/carton

 

STORAGE

12 months under dry condition below 25

 

TECHNICAL DATA SHEET:

Hardness shore A

Skin Over Time Min

Cure Time Hours

Tensile Strength

Densityg/cm³

38-42

30

48

0.8-1.0

1.41-1.43